Four times the footprint of a standard 10x10 . A high-peak roof that sheds rain instead of pooling it. A frame that folds down to 62 inches and fits in a van. The 20x20 is the largest tent in our range, and it is built from the ground up to handle the demands that come with running a serious large-scale event presence.
Get a Frame Strong Enough for a 400 sq ft Roof
Order with our 50mm hexagonal aluminum frame and you get a structure engineered specifically to carry the weight and span of a full 20x20 canopy without bending, sagging, or shifting mid-event. This is the frame that handles the job, not a scaled-up version of a smaller tent.
Count on a High-Peak Roof That Sheds Rain Cleanly
Choose the 20x20 and get a steep high-peak roof design that keeps the 600D polyester canopy under tight tension so rain runs straight off the sides. No pooling, no sagging, no water sitting on top of a massive roof and weighing your structure down during an outdoor event.
Print a Different Design on Every Side of the Tent
Order any 20x20 package and get unlimited full-color dye-sublimation printing. Put your primary logo on the front, your website on the sides, and a product graphic on the back. Every panel is a separate branding surface, and every color stays crisp and vivid after repeated outdoor use.
Transport 400 Square Feet in a Standard Van or Truck
Pack this tent into the included carry bags and the frame folds down to approximately 62 inches. It fits in most vans, SUVs, and pickup trucks without a trailer. Mobile marketing teams, event crews, and large-format vendors use the 20x20 specifically because it delivers maximum footprint without requiring a dedicated transport vehicle.
Tents Available for Large Events, Auto Shows, and Brand Campaigns
The 20x20 is not just a bigger tent, it is a full branded environment. With 400 square feet of covered space, you can run multiple zones, host large crowds, display full-size products, and create the kind of event presence that people talk about after they leave.
Auto Shows and Large Product Displays
Cover a full vehicle, a display counter, and a branded backdrop under one roof and give your audience a proper showroom experience at any outdoor event. The 20x20 is the go-to size for auto dealers, motorsport brands, and product companies that need to show their product at full scale, not just talk about it.
Brand Activations and Retail Zones
Set up a full large-scale retail zone, a lounge area, a product demo station, and a staff counter all under one 20x20 branded canopy and give your visitors a complete brand experience rather than a single-table booth.
Stand Out at Sponsorships
Replace a heavy, complex pole tent with a 20x20 pop-up canopy that four people can set up in 15 minutes and break down just as fast. Fully branded on every side, fire-certified for indoor and outdoor venues, and built to hold its ground through a full multi-day event without adjustment or maintenance.
Branded canopy tents canopies unlimited uses the best colour possible
for our printing services and to help guide you for the colors we use
the Pantone Colour Chart to help assist with your color selection and
specification process.
Every package starts with the same 50mm heavy-duty frame and full-color printed roof ,then you pick the wall coverage that matches your setup. With only five packages to choose from, picking the right one is straightforward. Answer these five questions and you will know exactly which one to order.
Know How Many People You Need to Set Up a 20x20 Tent
Plan for four people at setup. The 20x20 frame needs to open evenly on all four sides simultaneously to lock into position correctly, two people on each end pulling outward together. The push-button leg system locks into place fast once the frame is open, and four people get the full tent standing in about 15 minutes. Trying to set this up with two people wastes time, puts uneven stress on the frame joints, and makes the whole process harder than it needs to be. Four people, 15 minutes, and your 400 sq ft booth is ready.
Decide Which Wall Configuration Works for Your Event
Choose Package 1 if you only need a printed roof and maximum open visibility on all four sides. This works well for car displays and open-air activations where you want people to walk in from any direction. Move to Package 2 or 3 when you need a branded backwall or side walls to focus attention, block wind, or create a defined space. Choose Package 4 when you want three full printed walls that turn your 20x20 into an enclosed branded environment with one open entrance.
Check the Fire Certification Before Any Indoor or Tented Venue
Every 20x20 canopy ships with a physical fire certificate tag sewn directly into the corner of the roof fabric, not just a document in a bag. The fabric meets NFPA 701 and CPAI-84 fire-retardant standards, which are required at most US indoor venues, convention centers, and tented event spaces. Show the tag to any fire marshal or venue coordinator on site and you are cleared immediately.
Understand How Your Brand Gets Printed Across All Four Sides
Upload your artwork and get unlimited full-color dye-sublimation printing on the roof, all four peaks, all valances, and any walls included in your package. Put a different design on each side, primary logo on the front, product graphics on the sides, contact details on the back. Our design team builds your full layout for free and sends a 3D mockup for your approval before anything goes to print. Nothing moves to production until you sign off on every panel exactly as it will look on the finished tent.
Plan Your Order With Enough Lead Time for a Large Tent
Production begins after your artwork approval and runs 7 to 10 business days. Shipping is free straight to your door. For a tent this size, give yourself more lead time than you think you need, you want time to receive it, check every panel, do a test setup with your crew, and confirm that all four people on your setup team know the process before event day. If your event is coming up fast, ask about rush production before you place your order. Waiting until the week before is not the position you want to be in with a 400 sq ft custom tent.
FAQ
Frequently Asked Questions
Find answers to common questions about our tents and services
20x20 Custom Canopy Tents Package Deals
How many people does it take to set up a 20x20 tent?+
Because of the size and frame weight, we recommend four people for the setup. This way, the frame opens even on all sides. The push-button system locks the legs into place fast, and you get a massive booth ready in about 15 minutes.
Will this tent fit in a standard sized vehicle?+
The frame folds down to about 62 inches tall. It fits in most vans, SUVs, or pickup trucks. You do not need a trailer to move a 20x20 tent from event to event. This makes it the perfect choice for mobile marketing teams.
Is the roof fabric fire-certified for indoor use?+
Yes. The 600D polyester is fire-retardant, and it meets NFPA-701 and CPAI-84 standards. We sew a fire certificate tag into the corner of the roof. You can show this to any fire marshal or event manager on site.
Can I print a different logo on each side of the canopy?+
Yes, you can print a different logo on each side. All our packages include unlimited printing. You can put one logo on the front and different designs on the sides or back. We use a dye-sublimation process to keep colors crisp and vibrant.
Talk to Our Team Before You Order
Tell us your event type, crew size, and wall coverage needs ,we will match you to the right 20x20 package and send a free design mockup before your order goes to print.
